Showing all 15 results

HME OEM Acoustic Foam

HME OEM Acoustic Foam for Drive-thru Speakers and Mics

$17.20

Acoustic foam is a critical but often overlooked component of a properly functioning drive-thru speaker post. The foam serves two important purposes: it holds the speaker and microphone units firmly in place inside the speaker post housing without mechanical contact with the post walls eliminating vibration and rattling and it provides acoustic treatment that fills empty space inside the speaker post compartment, reducing unwanted echoes and reflections that cause muffled or unclear audio at the order point. When acoustic foam degrades, is missing, or was never properly installed, order accuracy can suffer and customers may struggle to communicate clearly with crew members.

Saw-Cut Vehicle Loop Detector

HME Saw-Cut Loop Kit

$44.88

The HME 333G012R is the OEM Saw-Cut retro-fit loop wire kit used when a drive-thru lane has already been poured and a new inductive loop must be installed or an existing failed loop must be replaced. It is also known as HME part number 400G766A (Retro-Fit Loop Saw-Cut Kit). A saw is used to cut a narrow slot in the existing concrete or asphalt pavement, the loop wire is laid into the slot in a rectangular pattern, and the slot is sealed with loop sealant to protect the wire from traffic and moisture — creating a reliable underground inductive loop for vehicle detection. This wire is the essential starting point for any saw-cut loop installation or repair at the menu board, cashier window, or present window detection points.

HME SP2500LP Speaker

HME SP2500LP Speaker

$123.63

The HME SP2500LP is HME’s low-profile outdoor speaker designed for installation at the drive-thru speaker post or in other exterior locations in the drive-thru environment. Its slim, low-profile form factor allows for a cleaner, more compact speaker post installation compared to larger conventional speaker assemblies — while still delivering the clear, loud audio output needed to communicate with customers clearly at the menu board, even in high-noise drive-thru environments with vehicle engine noise and wind interference. It is an OEM HME product specifically designed and voiced to integrate seamlessly with compatible HME drive-thru base station audio systems.

HME TSP50

HME TSP50 ZOOM Drive-Thru Timer Signal Processor

$913.75

HME TSP50 ZOOM Drive-Thru Timer Signal Processor with built-in onboard vehicle detector board is the core processing unit of HME’s industry-leading ZOOM Drive-Thru Optimization System, used in quick-service restaurants worldwide to measure, monitor, and improve drive-thru speed of service performance.

The HME TSP50 is the heart of the HME ZOOM drive-thru timer system. It is the signal processor that receives vehicle detection inputs, calculates car timing data at each detection point throughout the drive-thru, and communicates that data to the ZOOM Central Unit (CU50 or CU60) for display, reporting, and management. The TSP50 features a built-in onboard vehicle detector board, reducing the need for a separate external detector in many single-lane configurations, and includes expansion capability for additional VDB102 vehicle detector boards for multi-zone timing setups. The TSP50 is compatible with both the ZOOM 3.0 and ZOOM Nitro (4.x and 5.x) software platforms, making it one of the most widely deployed and sought-after drive-thru timer components in the QSR industry.

HME VDB102 Internal Vehicle Detector BoardHMEVDB102wHarness

HME VDB102 Internal Vehicle Detector Loop Board

$156.42

The HME VDB102 Internal Vehicle Detector Board is a critical drive-thru component from HM Electronics (HME), an industry leader in quick-service restaurant drive-thru communication systems worldwide. It connects directly inside a compatible HME base station or timer system. It interfaces with an underground inductive loop wire installed in the drive-thru lane to detect vehicle presence producing a tone in crew member headsets and activating drive-thru timers at designated detection points such as the menu board, cashier window, and present window.

The VDB102 is a direct upgrade replacement for the earlier VDB101 board and installs easily onto three plastic standoffs inside the base station with no soldering or special tools required. A built-in LED indicator lights when a vehicle is detected over the loop, making confirmation of proper operation quick and straightforward. The HME VDB102 Internal Vehicle Detector Board G27470 Drive-Thru Loop Sensor is compatible with the HME Ion IQ 6000, 6100, 6200 and 6700 systems as well as the HME EOS model base station. This product ships with a WIR-00004 Interconnect cable.

HME NEXEO Headset

HME NEXEO Headset WITH Battery

$910.62

The NEXEO HDX Alli-in-One Drive Thru Headset (Model HS7000) is designed for comfort and functionality in busy restaurant environments.

  • Audio quality: The patented HDX Digital Audio technology builds upon Wideband HD Audio, reducing background noise and improving the clarity of conversations.
  • Voice commands: Allows users to take hands-free actions, such as connecting to a drive-thru lane, calling a specific team member, or adjusting settings.
  • Ergonomic design: The headset is lightweight and comfortable for extended wear during a shift.
  • Easy pairing: The headset features nearfield technology that allows quick, “tap-to-connect” pairing with the
    NEXEO HDX Base Station
  • Durable construction: Built to withstand the demands of daily restaurant use.
  • Battery: The system uses a BAT70 battery pack, which is included with the headset and is replaceable for extended operational time.
HME AC70 Battery ChargerHME AC70 Power Supply

HME AC70 Charger with Power Supply

$403.17
  • Dimensions: 5.09 in L x 3.64 in W x 1.84 in H (129.2 mm x 92.4 mm x 46.7 mm).
  • Weight: 0.373 lb (0.169 kg).
  • Power supply: Wall plug with switchable adapters.
  • Input voltage: Universal 100 – 240 VAC nominal.
  • Charge output: Approximately 3W per port.
  • Ports: Four charging ports and four storage ports (storage ports do not charge batteries).
  • Tariff Fee of $4.17 included 
HME AC50 Battery ChargerHME AC50 Power Supply

HME AC50 Charger WITH Power Supply

$321.43

The HME AC50 is a multi-bay battery charger designed for HME drive-thru headset systems, particularly those that use BAT50 batteries. The charger is compatible with several headset models, including the HS6100, HS6200, and HS6300.

  • Capacity: It can charge up to four BAT50 batteries at once and has four additional storage slots for holding fully charged batteries.
  • Fast charging: The AC50 can fully charge a battery in about 2.5 hours.
  • Status indicators: LED lights on the charging ports indicate the battery’s charging status: yellow for an empty port, red for actively charging, and green for fully charged.
  • Smart technology: The charger has smart technology that monitors the battery’s temperature to prevent overheating and extends battery life through trickle charging.
  • Multiple mounting options: The charger can be used on a desktop or mounted on a wall with the included bracket.
HME BAT50 OEM BatteryHME BAT50 OEM Battery Back

HME BAT50 OEM Battery

$40.85

The HME BAT50 OEM Battery is a rechargeable battery used to operate the all-in-one wireless headset models HS6100, HWS6200 and HS6300.

Buy the HME Chrome HeadsetHME BAT50 OEM Battery

HME Chrome Headset with Battery

$920.85

HME Chrome Headset for use with the HME EOS | HD® base station. Ships with one (1) OEM BAT50 Battery. This headset also works with Wireless IQ and ION IQ Base Stations.

HME EOS Headset 6200

HME EOS Headset with Battery

$886.88

The HME EOS HD 6200 is a wireless headset system designed specifically for quick-service restaurant (QSR) drive-thrus. The system includes the headset and a base station, and is engineered for clear, intelligible communication with customers and employees.

HME DM5 Microphone for sale online from E.S.S. Nashville

HME DM5 Microphone

$167.75
  • Microphone type: Electronic
  • Impedance: 200Ω
  • Dimensions: 3.5” x 1.75” (88.9mm x 44.45mm)
  • Operating temperature: -22°F to +140°F (-30°C to +60°C)
HME DM4 Microphone

HME DM4 Microphone

$166.63

The HME DM4 Microphone (Part Number: G28291-1) is a directional microphone designed for use with HME ion|IQ and Wireless IQ drive-thru intercom systems. It is typically installed within the speaker post or menu board of a Quick Service Restaurant to capture clear customer audio while minimizing background noise.

This microphone is specifically engineered for HME ion|IQ and Wireless IQ drive-thru audio systems. It is a directional microphone housed in a molded foam enclosure to assist with mounting and acoustic isolation. Typically this microphone is mounted in the upper compartment of a speaker post or menu board, and connected to the system’s microphone/speaker cable wires.

HME SP10 Speaker

HME SP10 Speaker

$150.61
  • Weather-proof construction: Built to be used outdoors in menu boards, speaker posts, and enclosures.
  • Microphone function: Can also act as a high-quality microphone for HME intercoms such as the SYS2500 and COM400
  • Compatibility: Designed to provide optimal sound output quality when used with HME digital drive-thru systems.
  • Connectors: Comes with a green Phoenix style input connector, but users will need to secure their own wiring and other installation accessories, such as a speaker post.