Showing all 8 results

HME OEM Acoustic Foam

HME OEM Acoustic Foam for Drive-thru Speakers and Mics

$17.20

Acoustic foam is a critical but often overlooked component of a properly functioning drive-thru speaker post. The foam serves two important purposes: it holds the speaker and microphone units firmly in place inside the speaker post housing without mechanical contact with the post walls eliminating vibration and rattling and it provides acoustic treatment that fills empty space inside the speaker post compartment, reducing unwanted echoes and reflections that cause muffled or unclear audio at the order point. When acoustic foam degrades, is missing, or was never properly installed, order accuracy can suffer and customers may struggle to communicate clearly with crew members.

Panasonic CE-550 Speaker

Panasonic CE-550 Speaker/Microphone (non OEM)

$91.00

The CE-550 is is an aftermarket speaker/microphone combination unit designed as a direct replacement for the speaker/mic assembly in Panasonic drive-thru communication systems. The CE-550 has been used by major QSR chains for years and is widely trusted in the industry as a reliable, cost-effective alternative to OEM Panasonic replacement parts. The CE-550 is designed to drop in and perform reliably in the demanding outdoor environment of a drive-thru speaker post, exposed to weather, vehicle exhaust, road noise, and constant use day after day.

Important Note: This is NOT an OEM Product. It just LOOKS A LOT like one.

PAR Foam Block Microphone

PAR Duplex Microphone with Foam Block Assembly

$106.95

The PAR Duplex Microphone with Foam Block Assembly is a specialized commercial audio component designed for quick-service restaurant (QSR) drive-thru speaker posts and outside menu boards. Manufactured by PAR Technology, it is primarily engineered to integrate with 3M PAR G5 and XT-1 wireless communication systems.

Key Functions and Design

Acoustic Isolation: The surrounding high-density foam block acts as an acoustic absorber that dampens ambient environmental noise and eliminates local echo or reverb inside the speaker post enclosure.

Optimized Positioning: The block structures the physical orientation of the mic element, holding it securely at the precise angle needed to capture crisp customer audio.

PAR Duplex Microphone with Bracket

PAR Duplex Microphone with Bracket & Box

$149.25

The PAR Duplex Microphone with Bracket & Box can be used with PAR and 3M Wireless Communication System Models C960, C1025, C1060, and XT-1. Used where space is limited, and typically used in the outside menu or speaker post. Can be used in both single and dual lane configurations. PAR Part #78691152009

PAR RAW Microphone Assembly

PAR RAW Microphone Assembly

$57.40

The PAR RAW Microphone Assembly offers high-clarity, noise-canceling components and is designed to replace the microphone typically found in the PAR Foam Block acoustic assembly. When used correctly with an acoustic kit or existing post sound insulation, the foam block is not required. Stock Number #78691152009

PAR G5 Microphone Boots

PAR G5 Rubber Microphone Boot for Drive Thru Headset 10 pack

$36.74
The PAR G5 Rubber Microphone Boot is a disposable, protective cover for the microphone on a PAR G5 drive-thru headset, designed to prevent debris from clogging the mic, ensuring clear communication in fast-food environments, and fitting snugly while also allowing the LED lights to show through.
HME DM5 Microphone for sale online from E.S.S. Nashville

HME DM5 Microphone

$167.75
  • Microphone type: Electronic
  • Impedance: 200Ω
  • Dimensions: 3.5” x 1.75” (88.9mm x 44.45mm)
  • Operating temperature: -22°F to +140°F (-30°C to +60°C)
HME DM4 Microphone

HME DM4 Microphone

$166.63

The HME DM4 Microphone (Part Number: G28291-1) is a directional microphone designed for use with HME ion|IQ and Wireless IQ drive-thru intercom systems. It is typically installed within the speaker post or menu board of a Quick Service Restaurant to capture clear customer audio while minimizing background noise.

This microphone is specifically engineered for HME ion|IQ and Wireless IQ drive-thru audio systems. It is a directional microphone housed in a molded foam enclosure to assist with mounting and acoustic isolation. Typically this microphone is mounted in the upper compartment of a speaker post or menu board, and connected to the system’s microphone/speaker cable wires.