Home » Drive-Thru
Grid view List view

Showing all 24 results

EDI LMA-1250 Loop Detector

EDI LMA-1250 External Loop Detector with LM4-11 Harness and Power Supply

$228.92

The Eberle Design Inc. EDI LMA-1250 Inductive Loop Vehicle Detector with LMH4-11 connecting harness is a professional-grade, single-channel dual output loop detector from EDI, one of the most trusted and widely specified names in vehicle detection and access control equipment for over 40 years.

The EDI LMA-1250 DEFLECTOMETER Series is the industry standard for inductive loop vehicle detection in drive-thru, gate, barrier, parking, and access control applications. Its patented display provides real-time quantitative visual feedback that no other loop detector offers which allows installers and technicians to instantly verify loop performance, set the correct sensitivity, diagnose faults, and confirm proper installation without guesswork. Rugged, reliable, and compatible with virtually all 11-pin Amphenol-style access control systems, the LMA-1250 is the go-to detector for residential, commercial, and industrial drive-thru and barrier applications worldwide.

Also included is a 12V 2A DC Switching Power Supply AC Adapter – wired, soldered and tested, so the unit arrives ready to install and in perfect working condition. Please note that the product appearance may differ slightly from our example pictures.

Add to cart
HME OEM Acoustic Foam

HME OEM Acoustic Foam for Drive-thru Speakers and Mics

$17.20

Acoustic foam is a critical but often overlooked component of a properly functioning drive-thru speaker post. The foam serves two important purposes: it holds the speaker and microphone units firmly in place inside the speaker post housing without mechanical contact with the post walls eliminating vibration and rattling and it provides acoustic treatment that fills empty space inside the speaker post compartment, reducing unwanted echoes and reflections that cause muffled or unclear audio at the order point. When acoustic foam degrades, is missing, or was never properly installed, order accuracy can suffer and customers may struggle to communicate clearly with crew members.

Add to cart
Saw-Cut Vehicle Loop Detector

HME Saw-Cut Loop Kit

$44.88

The HME 333G012R is the OEM Saw-Cut retro-fit loop wire kit used when a drive-thru lane has already been poured and a new inductive loop must be installed or an existing failed loop must be replaced. It is also known as HME part number 400G766A (Retro-Fit Loop Saw-Cut Kit). A saw is used to cut a narrow slot in the existing concrete or asphalt pavement, the loop wire is laid into the slot in a rectangular pattern, and the slot is sealed with loop sealant to protect the wire from traffic and moisture — creating a reliable underground inductive loop for vehicle detection. This wire is the essential starting point for any saw-cut loop installation or repair at the menu board, cashier window, or present window detection points.

Add to cart
HME VDB102 Internal Vehicle Detector BoardHMEVDB102wHarness

HME VDB102 Internal Vehicle Detector Loop Board

$156.42

The HME VDB102 Internal Vehicle Detector Board is a critical drive-thru component from HM Electronics (HME), an industry leader in quick-service restaurant drive-thru communication systems worldwide. It connects directly inside a compatible HME base station or timer system. It interfaces with an underground inductive loop wire installed in the drive-thru lane to detect vehicle presence producing a tone in crew member headsets and activating drive-thru timers at designated detection points such as the menu board, cashier window, and present window.

The VDB102 is a direct upgrade replacement for the earlier VDB101 board and installs easily onto three plastic standoffs inside the base station with no soldering or special tools required. A built-in LED indicator lights when a vehicle is detected over the loop, making confirmation of proper operation quick and straightforward. The HME VDB102 Internal Vehicle Detector Board G27470 Drive-Thru Loop Sensor is compatible with the HME Ion IQ 6000, 6100, 6200 and 6700 systems as well as the HME EOS model base station. This product ships with a WIR-00004 Interconnect cable.

Add to cart
PAR G5 XT1 Internal Loop Vehicle Detector For Drive ThrusPAR G5 XT1 Internal Loop Detector

PAR G5 XT1 Internal Loop Detector VDB

$160.00

Manufacturer’s specifications

  • Dimensions: 2.5 x 3.0 inches (5.1 x 7.6 cm)
  • Power source: The board draws power directly from the G5 Base Station or XT1 Base Station terminals.
  • Voltage: 12 DC nominal.
  • Current: 50 mA maximum.
  • Connector: 3-wire plug-in connector. 
Add to cart
pre-fab_loop

Pre-Fabricated Loop Vehicle Detector

$178.99

A pre-fab loop (prefabricated loop) is a ready-to-install, factory-built inductive loop sensor for vehicle detection, featuring durable insulated wire in a protective jacket, designed for quick embedding in asphalt or concrete for drive-thru headset systems, electric gates, traffic lights & counters, which saves labor compared to custom-cut loops.

All loops shipped from E.S.S. are Contractor Friendly! They are less work to assemble & install, and offer longer leads which make for easier installation as well as more reliable detection long term for the end user.

If you are a General Contractor and need larger quantities of loops, or longer leads, or if you would like to save the shipping cost and pick your order up in Nashville, please call or email us here at E.S.S. – We have additional inventory at our Nashville office.

Please note that the appearance of the pre-fabricated loop in the photograph may differ slightly from the pre-fabricated loop that you will receive.

Add to cart
HME NEXEO Headset

HME NEXEO Headset WITH Battery

$910.62

The NEXEO HDX Alli-in-One Drive Thru Headset (Model HS7000) is designed for comfort and functionality in busy restaurant environments.

  • Audio quality: The patented HDX Digital Audio technology builds upon Wideband HD Audio, reducing background noise and improving the clarity of conversations.
  • Voice commands: Allows users to take hands-free actions, such as connecting to a drive-thru lane, calling a specific team member, or adjusting settings.
  • Ergonomic design: The headset is lightweight and comfortable for extended wear during a shift.
  • Easy pairing: The headset features nearfield technology that allows quick, “tap-to-connect” pairing with the
    NEXEO HDX Base Station
  • Durable construction: Built to withstand the demands of daily restaurant use.
  • Battery: The system uses a BAT70 battery pack, which is included with the headset and is replaceable for extended operational time.
Add to cart
PAR G5 headset battery from E.S.S. online store

PAR G5 Headset Battery

$79.00
  • End-of-life battery indicator provides a visual indication to when the battery’s useful life is ended and should be disposed of.
  • Compatible with the following headset models: PAR G5, 3M G5
  • 3.7V Lithium-ion Battery
Add to cart
HME BAT50 OEM BatteryHME BAT50 OEM Battery Back

HME BAT50 OEM Battery

$40.85

The HME BAT50 OEM Battery is a rechargeable battery used to operate the all-in-one wireless headset models HS6100, HWS6200 and HS6300.

Add to cart
Panasonic WX-SB100 Battery

Panasonic WX-SB100 Battery OEM Li-Ion Battery for Attune II

$47.31

The Panasonic WX-SB100 OEM Rechargeable Li-Ion Battery is the official replacement battery for the Panasonic Attune II HD3 WX-CH455 and WX-CH457 drive-thru headsets, used in quick-service restaurants worldwide.

About this Battery:

The Panasonic WX-SB100 is the genuine OEM battery designed and built specifically for use in Panasonic’s Attune II all-in-one drive-thru headset system. Unlike aftermarket or third-party alternatives, this is an authentic Panasonic product, ensuring proper fit, reliable performance, and compatibility with the WX-Z3040A battery charger. A properly functioning battery is critical in high-volume drive-thru environments where communication uptime directly impacts order accuracy and throughput. Panasonic recommends replacing headset batteries every 6 months for optimal performance in commercial environments.700mAh Li-Ion 3.7V Dimensions 40 x 31.1 x 5.9 mm

Add to cart
PAR G5 5 Slot Battery Charging Station NO Power Supply

PAR G5 5 Slot Battery Charging Station NO Power Supply

$325.00

The PAR G5 5 Slot Battery Charging Station (G5F1) is a high-quality and efficient charging solution designed specifically for restaurants and food service establishments. With its sleek design and multiple charging slots, this charger allows for quick and convenient charging of batteries and wireless headsets. The 3M brand ensures reliability and durability, making it a trusted choice for businesses in the food service industry.

Add to cart
PAR G5 3M Xt1 Power Supply

PAR G5 & 3M XT1 Power Supply

$48.05

This power supply functions with and will power the following equipment correctly to spec:

3M XT1 Base Station

PAR G5 Base Station

PAR G5 5 Slot Battery & Headset Charging Station

PAR PART #78691152231

Add to cart
PAR 5 inch Speaker in Case

PAR 5 inch Drive-thru Speaker in Metal Case

$157.75

QSR Drive-thru systems typically combine an outdoor speaker post with wireless headset systems to reduce wait times and improve order accuracy.

PAR 5 inch Drive-thru Speaker in Metal Case from E.S.S. includes a speaker, a weather resistant metal case, mounting bracket and screws

For use with the following 3M or PAR systems: 1025, 960, C1060, XT-1

Add to cart
PAR G5 Microphone Boots

PAR G5 Rubber Microphone Boot for Drive Thru Headset 10 pack

$36.74
The PAR G5 Rubber Microphone Boot is a disposable, protective cover for the microphone on a PAR G5 drive-thru headset, designed to prevent debris from clogging the mic, ensuring clear communication in fast-food environments, and fitting snugly while also allowing the LED lights to show through.
Add to cart
PAR G5 Managers Kit

G5 Headset Manager Service Kit

$37.24

The PAR G5 Headset Manager Service Kit is an essential, cost-effective maintenance package designed for in-store repair of the PAR G5 Drive-Thru Headset System. The kit includes replacement ear pads, headband side supports, and colored identification tags to maintain, sanitize, and repair headset carriers, preventing costly replacements.

(10) Earpad Foam Covers replacements for worn ear cushions
(5) Headband Side Supports restore structural integrity and fit
(7 pairs) Color Coded Tags used to identify or distinguish between different headsets
Compatibility: Designed specifically for the PAR Drive-Thru G5 Headset System

Add to cart
3M XT1 Base Station

3M XT1 Base Station REFURBISHED

$699.00

The 3M XT1 Base Station is the central hub for the 3M Wireless Drive-Thru Communication System, a legacy intercom system for fast-food restaurants that connects headsets, microphones, and vehicle loop sensors to manage orders. It offers features like self-diagnostics and clear audio for single or multi-lane setups. The 3M XT1 Base Station is considered a legacy system, as 3M officially ended support for the system in late 2021. E.S.S.Nashville offers a 90 day warranty from date of receipt for these refurbished base stations.

Any headsets, speakers, mics, loop detector, announcement module, and the power supply must be purchased separately.

These Base Stations ship with upgraded software which allows the usage of 3M XT-1 headsets as well as PAR G5 headsets.

Add to cart
XT-1 and c1060 replacement battery. Battery for XT-1 and c1060 headset systemsXT-1/c1060 Battery. Replacement battery for XT-1 and c1060 headset systems

XT-1/C1060 Battery

$30.00
  • Replacement for the following battery model/part numbers: BAT1060, CE-1060, CP-SN3M & CS-C1060SL.
  • Compatible with the following headset models: 3M C1060 & 3M XT-1.
  • 3.7V 1000mAh 3.7Wh Lithium-ion Battery.
Add to cart
Buy the HME Chrome HeadsetHME BAT50 OEM Battery

HME Chrome Headset with Battery

$920.85

HME Chrome Headset for use with the HME EOS | HD® base station. Ships with one (1) OEM BAT50 Battery. This headset also works with Wireless IQ and ION IQ Base Stations.

Add to cart
C1060 XT-1 Six Slot Charger for sale at E.S.S.

XT-1/C1060 Six Slot Battery Charger

$249.00
  • NEW IN BOX OEM Charging Replacement for the following battery model/part numbers: BAT1060, CE-1060, CP-SN3M & CS-C1060SL
  • Compatible with the following headset models: 3M C1060 & 3M XT-1.
  • 3.7V 1000mAh 3.7Wh Lithium-ion Battery charger
  • Item appearance may differ slightly from photograph
  • Manufacturer Part Number C936AA
  • Wall Outlet Power Cable is NOT INCLUDED and must be purchased separately
Add to cart
HME EOS Headset 6200

HME EOS Headset with Battery

$886.88

The HME EOS HD 6200 is a wireless headset system designed specifically for quick-service restaurant (QSR) drive-thrus. The system includes the headset and a base station, and is engineered for clear, intelligible communication with customers and employees.

Add to cart
HME DM5 Microphone for sale online from E.S.S. Nashville

HME DM5 Microphone

$167.75
  • Microphone type: Electronic
  • Impedance: 200Ω
  • Dimensions: 3.5” x 1.75” (88.9mm x 44.45mm)
  • Operating temperature: -22°F to +140°F (-30°C to +60°C)
Add to cart
HME DM4 Microphone

HME DM4 Microphone

$166.63

The HME DM4 Microphone (Part Number: G28291-1) is a directional microphone designed for use with HME ion|IQ and Wireless IQ drive-thru intercom systems. It is typically installed within the speaker post or menu board of a Quick Service Restaurant to capture clear customer audio while minimizing background noise.

This microphone is specifically engineered for HME ion|IQ and Wireless IQ drive-thru audio systems. It is a directional microphone housed in a molded foam enclosure to assist with mounting and acoustic isolation. Typically this microphone is mounted in the upper compartment of a speaker post or menu board, and connected to the system’s microphone/speaker cable wires.

Add to cart
Hygenx earphone covers - 100 count - Black - Sanitary headphone coversHygenx earphone covers - 100 count - Black

HygenX Sanitary Earpad Covers 100 CT Black

$21.30

These covers allow the sharing of headphones and headsets in schools, businesses, hospitals, museums and at home. Simply stretch the cover around your earphone and you’re ready to use your headphones with the peace of mind and cleanliness you desire.

Add to cart